Iconic Luminaires are instantly recognisable in the lighting world. As a proudly Czechia based manufacturer, we pay homage to the past, bringing you a new icon, the SVOPATT™.

Transforming into the modern age, you cannot fail to make an impact with the SVOPATT™ both as a scenic element and a source of captivating effects. With nine individual modules each containing 7 x 40W RGBW multichips and the centre pixel also containing a 200W white LED strobe, the fixture generates over 75.000 lm (integrating sphere). You have a source worthy of its lineage.

Helping to maintain this high level of performance, the RLCT™ lens coating protects against scratches and scuffs while preventing particle adhesion, ensuring your optics stay cleaner for far longer.

With a multitude of modes and protocols, including ArtNet and sACN ensuring easy pixel mapping; a choice of RGB or CMY colour mixing modes; variable CCT range from 1.700K to 20.000K; onboard DataSwatch™ colour library with 66 preset colours, and tungsten lamp emulation, the SVOPATT™ provides a comprehensive colour control set.

Each individual module contains a noise-dampened motorized zoom. With a range of 3.8° - 50° you can create tight beams or wide washes from each individual module.

Designed for noise-sensitive environments, the SVOPATT™ operates at an ultra-quiet 18 dB(A) in quiet mode due to its advanced cooling technology and noise dampening design. Along with Cpulse™ software for on-screen flicker removal and +/- green content control, this luminaire is ideal for studio environments.

Network communication is streamlined with REAP™ (Robe Ethernet Access Portal), while the Epass™ Ethernet pass-through switch maintains connectivity even when the fixture is powered off. To maintain the characteristic look of the original, an external power supply is included.

SVOPATT™ - New era for the iconic luminaire

Light source

9 modules of 7 x 40W RGBW multichips and 20 x 10W White strobe LEDs

Light output

75.000 lm, 118.000 lx @ 5 m

Zoom range

3,8° - 50°

Effects

Pixel control, Motorised exceptionally quiet zoom, Electronic strobe effect, Virtual colour wheel, Tungsten lamp effect, Preprogrammed pixel effects, White strobe effects

Innovations

RLCT™ – Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Cpulse™ – Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency, from either the fixture's onboard display or remotely via DMX. By frequency manipulation in a range from 800 Hz to 25 kH, you ensure no flicker will be visible on any camera system including the latest HD & UHD models, ready for 8K and 16K. This means our fixtures can be used with all the latest cameras types for TV, video and film applications.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

Product Video

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 9 modules of 7 x 40W RGBW multichips and 20 x 10W White strobe LEDs

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Robe’s proprietary optical design

High-efficiency zoom optical system, ratio 13:1

Zoom range: 3.8° - 50°

Fixture total lumen output:

75.000 lm (integrating sphere)
58.500 lm (goniophotometer)

Illuminance: 118.000 lx @ 5 m

RLCT™ Innovative lens coating technology

M-CEC™ (Multisource Central Extended Combination) system. This compact, quiet design synchronizes chamber and zoom movement, ensuring shadowless output without light loss

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

+ - Green correction function

Individual control of each RGBW pixel

9 individually controllable Strobe LED zones

White light: Variable CCT 1.700K - 20.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)

Motorised exceptionally quiet zoom

High resolution electronic dimming: 0 - 100%

Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

Control and programming

Setting & Addressing: ROBE Navigation System 3 (RNS3)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

DMX Protocol modes: 4

Control channels: 21, 124, 286, 384

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Noise Levels

Electrical specification and connections

SVOPATT™ Driver

Power supply: Electronic auto-ranging
Input voltage range: 200-240 V, 50/60 Hz
Power consumption: Max. 2400 W
Power connector in: Neutrik powerCON TRUE1
DMX and RDM data in/out: Locking 5-pin XLR connectors
Ethernet port in/out: RJ45, for Embedded Epass™ switch 10/100 Mbps
Power connector out: Amphenol connector

SVOPATT™

DMX and RDM data in: Locking 5-pin XLR connector
Power connector in: Amphenol connector

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Omega Adaptor CL-regular 2 pcs: 10980033

Alignment adaptor: 10981217

Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405

Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406

Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445

Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407

Single Top Loader Case: 10120358-01

Dual Top Loader Case: 10120360-01

Legal

Related News

29.1.2025

Robe at ISE 2025 – Preview

The Robe Group and all its businesses will be at the 2025 Integrated Systems Europe (ISE) expo in Barcelona next week, on Booth P100 in Hall 6 (Lighting & Staging).

20.12.2024

Robe Enjoys the Energy at LDI 2024

Leading lighting and LED manufacturer Robe Lighting s.r.o. enjoyed the pre-holiday buzz in the air at the Live Design International (LDI) expo in Las Vegas last week, ‘wowing’ crowds with a new live performance stage production, “The Fifth Dimension”, which helped win the coveted “Most Creative Use of Light” Award at the show.

2.12.2024

Robe at LDI 2024

Robe rocks back to Las Vegas for the 2024 Live Design International (LDI) show where the leading moving light manufacturer will be launching two exciting new products, the T.5 Profile – a smaller version of the acclaimed T1 – and the LedPOINTE, the new LED member of the famous Pointe family.

13.9.2024

Robe Bounces into Fifth Dimension at Brilliant PLASA 2024 Expo

Robe lighting enjoyed a brilliant PLASA 2024 expo in London Olympia, tapping into the hustle and energy of the show which is again a vibrant landmark on the UK production technology industry calendar.