Iconic Luminaires are instantly recognisable in the lighting world. As a proudly Czechia based manufacturer, we pay homage to the past, bringing you a new icon, the SVOPATT™.

Transforming into the modern age, you cannot fail to make an impact with the SVOPATT™ both as a scenic element and a source of captivating effects. With nine individual modules each containing 7 x 40W RGBW multichips and the centre pixel also containing a 200W white LED strobe, the fixture generates over 75.000 lm (integrating sphere). You have a source worthy of its lineage.

Helping to maintain this high level of performance, the RLCT™ lens coating protects against scratches and scuffs while preventing particle adhesion, ensuring your optics stay cleaner for far longer.

With a multitude of modes and protocols, including ArtNet and sACN ensuring easy pixel mapping; a choice of RGB or CMY colour mixing modes; variable CCT range from 1.700K to 20.000K; onboard DataSwatch™ colour library with 66 preset colours, and tungsten lamp emulation, the SVOPATT™ provides a comprehensive colour control set.

Each individual module contains a noise-dampened motorized zoom. With a range of 3.8° - 50° you can create tight beams or wide washes from each individual module.

Designed for noise-sensitive environments, the SVOPATT™ operates at an ultra-quiet 18 dB(A) in quiet mode due to its advanced cooling technology and noise dampening design. Along with Cpulse™ software for on-screen flicker removal and +/- green content control, this luminaire is ideal for studio environments.

Network communication is streamlined with REAP™ (Robe Ethernet Access Portal), while the Epass™ Ethernet pass-through switch maintains connectivity even when the fixture is powered off. To maintain the characteristic look of the original, an external power supply is included.

SVOPATT™ - Updating the iconic

Light source

9 modules - each module containing 7 x 40W RGBW Multichips, middle pixels containing additional 200W white strobe LEDs

Light output

75.000 lm, 118.000 lx

Zoom range

3,8° - 50°

Effects

Pixel control, Motorised exceptionally quiet zoom, Electronic strobe effect, Virtual colour wheel, Tungsten lamp effect, Preprogrammed pixel effects, White strobe effects

Innovations

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

RLCT™ - Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

Cpulse™ - Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency to ensure no flicker will be visible on any camera system.

L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

DataSwatch™ - inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures consists of up to 237 pre-programmed and calibrated colours and tones, allowing for rapid and accurate programming.

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type:

9 modules - each module contains 7 x 40W RGBW multichips
Middle pixels contain additional 200W white strobe LEDs

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

+ - Green correction function

Individual control of each RGBW pixel

9 individually controllable Strobe LED zones

White light: Variable CCT 1.700K - 20.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)

Motorised exceptionally quiet zoom

High resolution electronic dimming: 0 - 100%

Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

Control and programming

Setting & Addressing: ROBE Navigation System 3 (RNS3)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

DMX Protocol modes: 4

Control channels: 21, 124, 286, 384

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Noise Levels

Electrical specification and connections

SVOPATT™ Driver

Power supply: Electronic auto-ranging
Input voltage range: 200-240 V, 50/60 Hz
Power consumption: Max. 2400 W
Power connector in: Neutrik powerCON TRUE1
DMX and RDM data in/out: Locking 5-pin XLR connectors
Ethernet port in/out: RJ45, for Embedded Epass™ switch 10/100 Mbps
Power connector out: Amphenol connector

SVOPATT™

DMX and RDM data in: Locking 5-pin XLR connector
Power connector in: Amphenol connector

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Legal

Related News

13.9.2024

Robe Bounces into Fifth Dimension at Brilliant PLASA 2024 Expo

Robe lighting enjoyed a brilliant PLASA 2024 expo in London Olympia, tapping into the hustle and energy of the show which is again a vibrant landmark on the UK production technology industry calendar.

29.8.2024

Robe at PLASA 2024

Robe is using the buzz and hustle of the 2024 PLASA London expo to launch four new important and super-cool products – the iFORTE Fresnel, the PAINTE Fresnel, the SVOPATT and the SVB1.

Partner's websites:

We are proud sponsors of:

We are member of:

SVOPATT™

SVOPATT™

Technical Specification

Related News

Navigate

Log in

Follow Us

Stay in Touch

Navigate

Log in

Follow Us

Stay in Touch