Make outdoor lighting complications and stress a thing of the past! Our nocompromise, self-maintaining, revolutionary iESPRITE® delivers consistent, hassle-free performance without complex maintenance procedures, whatever the weather or atmospheric conditions.

The IP65-rated iESPRITE® combines our latest protection technology with the highly desired ESPRITE® maintaining identical output and feature-rich effects in a fully protected package capable of handling all the challenges of outdoor environments.

Joining the Robe iSeries iESPRITE® again negates the traditional weight penalty associated with IP-rated fixtures having similar weight to the indoor ESPRITE®. With class-leading form factor, size and appearance, and all the features and identical performance of the indoor original, iESPRITE® once again enables seamless integration between models, even on the same truss if desired!

The ingenious ingress protection system has been specifically designed to allow standard maintenance and preparation procedures, such as TRANSFERABLE ENGINE exchange and gobo replacement, without any additional tools, as gobo changes or maintenance work can be done on-site.The onboard patented RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system that automatically removes any moisture detected within the fixture and provides constant monitoring to ensure peak performance.

iESPRITE® runs an ingenious Self Pressure Test to check internal pressure. This self-test, taking less than 3 minutes, provides an error message if gaskets and covers were not replaced correctly or locking screws were incorrectly tightened, ensuring maximum protection.

Their lightweight magnesium alloy covers, with aluminium alloy substructure, provide a dust-free environment for the optics. This eliminates the need for frequent cleaning, routine maintenance, and UV damage to plastic parts. To maintain consistently high lumen output, even with the rigours of outdoor performance, water, dirt, dust, haze, and smoke are repelled from the front lens with our unique parCoat™ hydrophobic, oleophobic-resistant coating. Furthermore, it allows easy removal of deposits without scratching or damage.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered directly from your mobile device using the Robe Com app.

Outdoor fixtures need to operate in extreme cold. iESPRITE® contains an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture´s sensors and communications channels continue to function. When activated, POLAR+™ automatically maintains an internal temperature level, giving instant operability down to minus 50 degrees centigrade!

iESPRITE® is available with a choice of patented IP65-rated iSE-TE™ 650W White LED TRANSFERABLE ENGINES; HP (High Performance) 6.700 K, 34.000 lm CRI70; HCF (High Colour Fidelity) 6.000 K, 22.800 lm CRI 96.

The identical 9:1 zoom optical system, with a 5.5° to 50° zoom range, provides all the flexibility you need. Our cutting-edge CMY colour mixing system provides beautifully smooth mixing and transitions. Combined with two colour wheels, CRI 80 and 90 filters (HP Engine), and a variable CTO from 3.000 – 6.700 K give iESPRITE® total colour finesse. With the patented Plano4™ four individual plane framing shutters; one rotating fully indexable and one static gobo wheel; an animation wheel; a 6-facet bi-directional variable speed prism and two MagFrost™ 1° and 5° frosts, you have all the creative tools you need. Removing the need for distracting pre-use pan and tilt calibration movement, our patented MAPS™ (Motionless Absolute Positioning System) allows the fixture to fully calibrate while remaining static. Very useful when located within confined spaces.

For those requiring maintained network connectivity, we have Epass™ available as standard. Our REAP™ (Robe Ethernet Access Portal) allows access to fixture information and diagnostics over Ethernet Networks. Perfect for installations requiring remote centralised monitoring of fixture performance. Important for television users, Cpulse™ provides flicker-free management of the latest camera systems.

iESPRITE® is fully compatible with our industry-leading RoboSpot™ remote-controlled follow-spot system.

iESPRITE® - Robe reliability in all weathers.

Light source

iSE-TE™ 650W White LED TRANSFERABLE ENGINE

Light output

34.000 lm, 85.000 lx @ 5m, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K

Zoom range

5.5° - 50°

Effects

Static and rotating gobo wheel, Animation wheel, Framing shutters, Prism

Innovations

TE™ - Robe’s Transferable LED Engines

The TE™ technology addresses the problem of performance longevity of ageing LEDs by making the exchange of the engine a simple procedure that can be carried out in just a few minutes. But transferable means so much more than replaceable!

Cpulse™ - Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency to ensure no flicker will be visible on any camera system.

MCE™ - Split and multicolour effects

Robe offers unique split- or multi colour effects in two ways on our profiles and spot fixtures to add a whole new blend of creativity to your designs!

HotSpot lens for LED profilers

By introducing our unique, patented 6:1 ratio hotspot lens, we alter the field characteristics to create a centre-weighted, peaked beam. By adding a frost filter, you can now effortlessly achieve silky-smooth washes!

EMS™ - Electronic Motion Stabiliser

The Robe Electronic Motion Stabiliser is a technology for exact Pan and Tilt movements and reduces vibrations from audio outputs, truss movement and sprung or suspended floors.

L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Slot & Lock Gobos

Robe's patented "slot & lock" system allows for easy and fast replacement of both rotatable and indexable gobos.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

Plano4™ Framing shutters

Robe's patented Plano4™ 4-blade framing shutter module offers unparalleled beam control with individual movement and rotation control for each blade. The Plano4™ FC module features full curtain movement, allowing each blade to move entirely across the light path for full-wipe capability.

airLOC™

Our AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

Robe NFC controller and app

The Robe COM application is an app based on NFC (Near Field Communication). It can be either used to access to fixture’s settings of our NFC-based navigation display systems as well as reading out data of our TE™ Transferable Engines.

MAPS™ - Motionless Absolute Positioning System

Pre-use pan and tilt calibration movement of a fixture can be distracting and sometimes difficult to achieve.

RAINS™ – Robe Automatic Ingress Protection System

The highly advanced patented RAINS™ (Robe Automatic Ingress Protection System) technology not only prevents ingress. It actively manages a fixture's internal microclimate removing internal moisture build-up caused by constant heating and cooling to provide maximum protection for electronics, revolutionising how outdoor fixtures are managed and protected.

parCOAT™

To maintain consistently high lumen output, even with the rigours of outdoor performance, water, dirt, dust, haze, and smoke are repelled from the front lens with our unique parCoat™ hydrophobic, oleophobic resistant coating.

POLAR+™

Outdoor fixtures need to operate in extreme cold. Therefore, Robe iSeries™ fixtures contain an innovative POLAR+™ technology - a special standby mode with low power consumption, in which the fixture's sensors and communications channels continue to function.

Product Video

Gobos&Colours

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: iSE-TE™ 650W HP White LED Engine (patented):

HP - High Performance Engine for maximum light output and optimal colour characteristics
LED Engine output: 55.000 lm
Fixture total lumen output:

34.000 lm (integrating sphere)
27.000 lm (goniophotometer)

Colour temperature output: 6.700 K
CRI: 70, remotely selectable filters for CRI 80 and CRI 90
Illuminance: 85.000 lx @ 5 m

Light source type: iSE-TE™ 650W HCF White LED Engine (Patented):

HCF - High Colour Fidelity Engine for the best light quality and colour rendition
LED Engine output: 37.500 lm
Fixture total lumen output:

22.800 lm (integrating sphere)
18.300 lm (goniophotometer)

Colour temperature output: 6.000K
CRI: 96, TLCI: 97, TM-30-18 Rf: 92, TM-30-18 Rg: 99
Illuminance: 59.000 lx @ 5 m

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Light source warranty: 4 years or 20.000 hours

Optical system

Dynamic Effects and Features

Cyan: 0 - 100%

Magenta: 0 - 100%

Yellow: 0 - 100%

Variable CTO: 3.000K - 6.700K

ChromaTint™ - Patented plus / minus green correction function

Colour Wheel 1: 5 fixed dichroic colours + white

Colour Wheel 2: 5 fixed dichroic colours + white

Framing shutters: Patented Plano4™ framing shutters module with 4 individually positionable blades plus rotation of the complete frame system + - 60°

Rotating gobo wheel: 7 rotating, indexable and replaceable breakup and aerial gobos + open, patented slot & lock system

Static gobo wheel: 9 static and replaceable gobos + open

Animation wheel: Aluminium animation wheel, used alone or in combination with gobos, rotating in both directions at variable speed

Prism: 6-facet prism rotating in both directions at variable speed

Iris: Motorized, stepless, pulse effects up to 3 Hz

Frosts: MagFrost™ - magnetic paddle fast change system providing exchangeable frosts containing as standard a very light 1° for instant softening of the projected gobo or framing shutters, and a medium 5° for even wash, both specifically selected for theatre and TV use

Hot-Spot: from flat field to 6:1 hot-spot (optional)

Motorized zoom and focus

Electronic strobe effect with variable speed up to 20 Hz

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.

POLAR+™ for power saving and instant operation in extremely cold weather conditions

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding, NFC app controller

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance

DMX Protocol modes: 4

Control channels: 49, 42, 50, 43

Pan & Tilt resolution: 16 bit

CMY & CTO: 8 bit

+ - Green correction: 8 bit

Colour wheel positioning: 8 or 16 bit

Framing shutters module movement & rotation: 8 bit

Rotating gobo wheel positioning: 8 bit

Gobo indexing & rotation: 8 or 16 bit

Static gobo wheel positioning: 8 bit

Animation wheel: 8 bit

Animation wheel rotation: 8 bit

Iris: 8 or 16 bit

Frost: 8 bit

Zoom: 8 or 16 bit

Focus: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Rotating gobos

Static gobos

Effect wheel

Framing shutters system

Thermal specification

Noise Levels

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

iESPRITE iSE-TE™ 650W HP White LED Engine: 14080086

iESPRITE iSE-TE™ 650W HCF White LED Engine: 14080087

Frost 0.5° (exchange) assembled: 10980583

Frost 10° (exchange) assembled: 10980497

Frost 20° (exchange) assembled: 10980574

Frost 30° (exchange) assembled: 10980584

Hot-Spot lens in gobo holder: 10980483

Gel frame adaptor: 10980463

Gel frame: 10980464

Doughty Trigger Clamp: 17030386

Omega Adaptor Tall CL - 2 pcs in box: 10980501

Safety wire 36 kg: 99011963

Single Top Loader Case: 10120312

Dual Top Loader Case: 10120313

Foam Shell: 20020464

Top Hat: 10980568

Legal

Related News

12.2.2024

Robe Imbibes the ISE Vibes

Robe lighting enjoyed the great vibes, brisk business, lively atmos and fantastic visitor numbers checking out the 2024 Integrated Systems Europe (ISE) expo at FIRA Barcelona, Spain.

25.1.2024

Robe at ISE 2024

Robe Lighting will exhibit on booths 1C700 and 1D700 in Hall 1 at the Integrated Systems Europe (ISE) expo 30th January to 2nd Feb February 2024 at Fira Barcelona in Spain, where it and sister businesses – Anolis, Avolites and Artistic Licence – will share a dynamic space and present an interesting array of new and popular products.

12.12.2023

A Powerful & Imaginative LDI for Robe

Robe enjoyed the buoyance of a busy year in North America at the 2023 LDI Conference and Tradeshow inside the new West Hall at Las Vegas Convention Center.

23.6.2023

Robe at ABTT 2023

The Robe UK team report a busy, successful, and very positive ABTT (Association of British Theatre Technicians) expo staged at Alexandra Palace in London, UK.

Partner's websites:

We are proud sponsors of:

We are member of:

iESPRITE®

iESPRITE®

Product Video

Gobos&Colours

Rotating Gobo Wheel

Rotating Gobo Wheel

Static Gobo Wheel

Static Gobo Wheel

Colour Wheel 1

Colour Wheel 1

Colour Wheel 2

Colour Wheel 2

Animation Wheel

Animation Wheel

Technical Specification

Related News

Navigate

Log in

Follow Us

Stay in Touch

Navigate

Log in

Follow Us

Stay in Touch